Submersible pressure transducer PL301 Submersible level transmitter
Feature of PL301 Submersible level transmitter
● Wide range application
● Long service life
● Diffused silicon oil-filed sensor cell
● CE certificate
● Reinforcement cables optional
● Intrinsically sate ,explosion proof
Specifications of PL301 Submersible level transmitter
| ssure medium | liquid compatible stainless steel |
| pressure ranges | 0~1 m H2O...300 m H2O |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0.4 ~4.5V, 0~5V, RS485, RS232, 868 Mhz 4~20mA+Hart |
| accuracy | 0.1%FS,0.25%FS,0.5%FS (standard) |
| load resistance | RL = (U-10)/0.02(Ω) (4~20mA current output), ＞20KΩ (voltage output) |
| long term stability | 0.2%FS/year |
| supply voltage | 10~36VDC |
| compensated temperature range | -10~70°c |
| operating temperature range | -20~85°c |
| storage temperature range | -40~125°c |
| temperature coefficient of zero | ±0.015%FS/°c@25°c |
| temperature coefficient of span | ±0.02%FS/°c@25°c |
| insulation resistance | 100MΩ@ 250VDC 100MΩ@ 500VDC |
| Pressure connection | screw thread, throw-in type |
| Protection grade | IP68 |
| material of wetted part and housing | 304SS or 316L |
| material of pressure membrane | 316L |
| Response time | 1ms |
Applications PL301 Submersible level sensor
● Hydraulic monitoring
● Frequency water supply
● Liquid measuring for petroleum ,metallurgy
● City water supply
● Sewage treatment
● Tank level monitoringT
● Water-saving irrigation
● Circulation fluid monitoring
Description PL301 Submersible level transmitter
For corrosive media applications such as seawater or leachate, especially in landfills, we offer advanced dual phase stainless steel submersible level transmitters with extremely high corrosion resistance.
Submersible level sensor with 304 stainless steel housing and waterproof cable, can be directly into the water/oil/tank or reservoir for level measurement. Measuring range :0 to 1m, 0 to 3m, 0 to 5m, 0 to 10m, 0 to 500m. The accuracy of the liquid level sensor is 0.5%FS or 0.3%FS. Output signal 4-20mA/0-5V/RS485, power supply 24V/12V. Cable type and connection type are also customizable.
Submersible level sensor is essentially a pressure sensor used to measure liquid level. According to the principle that the static pressure of the liquid under test is proportional to the height of the liquid, the static pressure is converted into electrical signal by the isolated diffusion silicon sensor or ceramic capacitive pressure sensor. The signal after temperature compensation and the linear correction is converted into a standard signal. Submersible level sensor is generally used in petrochemical, metallurgy, electric power, pharmaceutical, water supply and drainage, environmental protection and other media liquid level measurement.
The PL301 series submersible level sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These hydrostatic transmitters are designed for the most demanding industrial applications. Unlike ultrasonic level transmitters, our level sensors are completely unaffected by any foam, steam, turbulence or condensation in the container.
The PL301 series tank level sensor is located at the bottom of the tank and measures the pressure of the liquid head pressed against the stainless steel sensing diaphragm. This is the only submersible level sensor with an integral molded weight to ensure the sensor stays on the bottom and you will always receive accurate, reliable readings.
With a 316 stainless steel body, these level sensors are designed to handle some of the most demanding applications. All models are equipped with Teflon® sheathed cables and Kalrez® O-ring seals to ensure it stands up to the industry's most corrosive chemicals.
Our submersible level transmitters require no programming, no moving parts, and a clog-free design. They are the industry's CSS, the most reliable class of sensors, making them the perfect solution for complex applications where ultrasound cannot be preformed.
Product Tags:
|
|
0 - 500m Submersible Pressure Transducer For Circulation Fluid Monitoring Images
|
